Hallo Slotwelt
Hallo FreeSlotter
mein erster Post ist eine Frage für die ich schon länger eine Antwort suche:
Wo finde ich ein "Kronzahnrad mit Führung" für 3mm Achse?
Für 2,38mm kein Problem aber 3mm? - nichts zu finden.
Vielen Dank für jeden Hinweis!
Kronzahnrad mit Führung für 3mm Achse
-
-
Hallo,
Soweit mir bekannt gibt es das nicht für 3mm Achsen.
Entweder du bohrst auf oder du arbeitest mit einem Stellring.Beste Grüße,
Ecki
-
3mm mit Führung kenne ich nicht.
Wenn man die Achse mit Distanzhülsen einstellt, braucht man allerdings keine Führung.
LG Mike
-
-
Vielen Dank für die schnellen Antworten!
Werde mal beides (Aufbohren und Distanzhülsen) ausprobieren.Grüße von RaceOtter
-
Jep, sind 3mm Achsen
ZITAT:
http://www.slotcity.co.uk/news…ts-n-130?newsdeskPath=912
Contrate / Spur Gears- (Scalextric C8404) Assorted Contrate Gears (x5)
- (Scalextric C8405) Assorted Spur Gears (x5)Each pack contains five gears, one each of 25/26/27/28/29 tooth for the contrate gears and one each of 34/35/36/37/38 tooth for the spur gears.
The contrate / spur gears are the larger gears on the rear axle. Contrate gears are used with inline mounted motors, and sit in the middle of the rear axle. Spur gears are used with sidewinder mounted motors, and sit at one end of the rear axle.
Whilst standard gears are simply pushed on to the rear axles, the performance gears are held in place by small screws - making them a lot easier to change. An allen key for these screws is included with each pack of gears.
The new performance contrate and spur gears can only be used with the new performance 3mm axles. They are not compatible with the axles fitted as standard to Scalextric cars (or any 3/32" axles).
Changing the size (ie the tooth count) of the contrate / spur gear alters the gearing of a car which in turn has a major effect on the way it performs. For more details on this please see the section on gearing ratio below.
-
Hallo Road Runner
vielen Dank für den geposteten Link.
Die og. Zahnräder
- (Scalextric C8404) Assorted Contrate Gears (x5)
- (Scalextric C8405) Assorted Spur Gears (x5)
werden zwar für 3mm angeboten, haben aber keine Führung.
https://www.pendleslotracing.c…sport-contrate-gears.html
Es gibt zwar welche mit Führung, aber das scheinen keine "performance"-Teile zu sein:
https://www.pendleslotracing.c…ate-inline-gear-pack.html
Sehe ich das richtig oder hab ich was übersehen?Gruß RaceOtter
-
Ich habe die Teile auch noch nie im Original gesehen, aber lt. Bildern sind die Kronräder 2-teilig.
Eine Aluaufnahme für ein gelbes Kronrad.
Eine Aluaufnahme für einen blauen Kunststoffring.
Somit kann man mit dem 2-teiligen Kronrad alle Maße für Motorwellen (1,5mm, 2,0mm usw.) einstellen.
Die Bohrung für die Hinterachse hat 3mm.[Blockierte Grafik: https://ssli.ebayimg.com/images/g/XJcAAOSwFb5aOekr/s-l1600.jpg]
-
... so daß die Motorwelle von einer Seite mit dem aufgesetzten blauen Ring geführt wird?
Von der anderen Seite wird eh das Kronzahnrad an das Ritzel gehalten.
Somit wäre das Ritzel zwischen 2 Teile "eingeklemmt".
Könnte es so sein?
(Schade daß kein Bild einer zusammengebauten Hinterachse verfügbar ist.)Gruß
-
Könnte es so sein?
So ist es.
Die Variante mit dem blauen Ring ist gut. Der Kunststoffring ist bestimmt langlebiger als eine reine Alu-Laufbahn.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!